Receive one of our products
for a free no-obligation trial
Find Out More
Deburring, Grinding, Sanding, Polishing Case Studies
 |
General Electric (Macallen, Texas) / June 2011 General Electric's Macallen facility overhauls Aviation engines. Some of the operations require welding, grinding, and deburring of parts. To ensure the workers well being, GE set forth requirements of a custom downdraft table. |
|
| read more |
 |
Bombardier - Learjet (Tuscon Arizona) / June 2011 Bombardier is a worldwide manufacturer of commercial and private aircraft. The Learjet repair and rework facility in Tuscon Arizona approached Diversi-tech for a dust control solution in their composite sanding area. |
|
| read more |
 |
Dresser Rand (Houston, Texas) / April 2011 Diversi-Tech designed a downdraft that allows for two operators to work at opposite ends of the station. The downdraft is fitted with specific table tops, tool racks, power outlets and pneumatics so as to make the downdraft a workstation. |
|
| read more |
 |
Sander Geophysics (Ottawa, Ontario) / April 2011 Diversi-tech installed a 3000cfm wet dust collector connected to all 7 stations (2 band saws, 1 spindle sander, 1 cut off saw, 1 drill press, 1 belt sander and 1 spare port for shop clean-up). |
|
| read more |
 |
Sputtek (Tornoto, Ontario) / April 2011 A centralized system was installed which allowed for 4 debburing station to be linked up to one centralized dust collection system, with a 15hp motor. |
|
| read more |
 |
Boeing (Wichita, Kansas) / March 2005 Diversi-Tech installed (4) 2x4-EO downdraft tables with extended front overhangs(EO) so that operators could be comfortably seated at the table. (2) 3x6 and (2) 3x8 tables were also installed. |
|
| read more |
 |
Bernstein Display (New York, New York) / September 2005 Bernstein Display is based in New York State. They selected Diversi-Tech's 4'x8' Downdraft Table with front cutouts and a non-marring pvc mat. Front cutouts allow the operator to work over the edge of the worksurface as suction is provided to the front face of the workbench. Dust levels have been reduced by over 90%. |
|
| read more |
 |
Air Canada (Montreal, Quebec) / August 2005 Canada's National Carrier, Air Canada, Based in Montreal asked Diversi-Tech to find a solution to their dust problem in the landing gear maintenance area. |
|
| read more |
Try Before You Buy
Downdraft Tables
Portable Fume Extractors
Wet Dust Collectors
Centralized Dust & Smoke Collectors
Filter Cleaning Machine
Ambient Air Cleaners
Oil Mist & Oily Smoke
Educational Solutions
Capture Arms & Fans
Portable Compact Air Cleaners
Filters & Replacement PartsQuick Contact
- toll free: 1-800-361-3733
- tel: (514)-631-7300
- Send us an Email Go to Contact Form Company Profile